PX60 polished shaft rolling ring drive GP60-LX with high quality discount price QIPANG
The principle of operation of the rolling ring drive is based on the transformation of the rotational movement of the drive shaft into a linear movement of the rolling ring drive on a smooth shaft in two directions using the interaction of friction forces between the drive shaft and the collars of the ball bearing mechanism for switching the stroke of the rolling ring drive.
The main advantages of the traverse unit drive principle
1.Highest possible efficiency due to the fact that the gear and the payload are completely supported by roller bearings
2.Automatic traversing movement
3.Variable traversing speeds ranging from 0 m/s to a maximum of 4.2 m/s; can also be separately set for the two directions with constant rotation of the shaft
4.Variable traversing width and traversing position
5.High dynamics at the points of reversal
6.Can be released from the shaft
7.Low operating costs
8.Low maintenance requirements
AB type rolling ring drive parameter table
Technical characteristics of the rolling ring drive series GP3
Step controller of the folding carriage.
The divisions from 0 to 10 on the scale (A) of the folding cage are used to establish the step of the carriage. To establish the desired value, it is necessary to press on the indicator (B), To-dividing it thereby to the scale, and set the required value.
Regulation of balance (clearance) of the guide carriage.
Regulation of the carriage is provided with the help of guide rollers (C and D) and guide rail (A). If the distance between the two rollers does not match the width of the rail, then loosen the bolt on the lower guide roller (D), rotate the nut (B) until the appropriate clearance for the carriage stroke is established.
Rolling ring linear drive select type